My cart

0 item(s) - $0.00

  • Your shopping cart is empty!

6mm Hex Head Tensioner ProRig AISI 316
6mm Hex Head Tensioner ProRig AISI 316

6mm Hex Head Tensioner ProRig AISI 316

Retail: $2.83
Trade: $2.46
Ex Tax: $2.24

OverView

Hex Head Tensioner 6mm ProRig AISI 316-Imperial closest equivalent 15/64 inches (5.9531mm)

Below are optional accessories that are suitable for use with this product

If you would like any of these accessories, enter desired quantities here, then click ADD TO CART button below

Swage Stud suits 3.2mm wire M6 x 48mm RHT

Swage Stud suits 3.2mm wire M6 x 48mm RHT

$3.25 Ex Tax: $2.95

Swage Stud suits 3.2mm wire M6 x 75mm RHT

Swage Stud suits 3.2mm wire M6 x 75mm RHT

$3.39 Ex Tax: $3.08

Rod Terminal 35 x 6.2mm suits 3.2mm Wire

Rod Terminal 35 x 6.2mm suits 3.2mm Wire

$1.88 Ex Tax: $1.71

Bevelled Washer Flat 8mm 37 degrees

Bevelled Washer Flat 8mm 37 degrees

$2.98 Ex Tax: $2.71

  • Grand total (including added accessories):

  • Grand total (Ex Tax):

Hex Head Tensioner 6mm ProRig AISI 316

-Imperial closest equivalent 15/64 inches (5.9531mm)

Miami Stainless AISI 316 stainless steel 5mm Econ Hex Head Tensioners are used in conjunction with 5mm Swage Studs to create a tensioning system or balustrade. Miami Stainless 5mm Econ Hex Head Tensioners pass through each post providing an aesthetically pleasing end stopper. When used with stainless steel Bevelled Washes, Tensioners can be used on stair, ramp or angled sections. Miami Stainless 5mm Econ Hex Head Tensioners are easily tightened with a 5.00mm Hex Socket Key (Allen Key).




CODETHREADLDD1ALLEN KEY
S7500-05PRM5 RHT358127/32"
S7500-05ECM5 RHT358125mm
S7500-06PRM6 RHT388121/4"


hiii